Konica Minolta bizhub 42 - Manual (Page 86)

bizhub 42/36 8-6
8.2 Troubleshooting table 8
Main messages and their remedies
If any message other than those listed below appears, perform the operation described in the message.
Message Cause Remedy
[Replenish Paper]
[Replenish paper in Tray o or
select other paper tray.
xxx] Paper of a suitable size is not
loaded in a paper tray. Load paper of a suitable size or
select another paper tray.
[Paper Size/Type Mismatch]
[Load the following paper in tray
o.
xxx] The type and size of the paper
loaded into all of the paper trays
are different. Load the specified paper into a
paper tray.
[Paper Size Mismatch]
[Load the following paper or
cancel job.
xxx] The paper size specified from the
Touch Panel is different from the
size of paper loaded in the paper
tray. Load paper of the correct size
into the indicated paper tray.
[Matching Paper not Available]
[Matching paper size not availa-
ble.
xxx] Paper of the same size as the
document cannot be selected
with the Auto Paper setting se-
lected in Copy mode. Load the paper tray with paper of
the same size as the document.
[Replenish paper]
[Replenish paper.
xxx] The indicated tray has run out of
paper. Add paper. (p. 7-3)
[Check Scanner Lock Lever]
[Unlock the scanner lock lever.] The scanner is locked. Cancel the job.
Unlock the scanner.
[Place Original on Glass]
[Unable to scan from ADF with
this original size] The selected document size can-
not be scanned from the ADF. Place the document on the origi-
nal glass if it has a size that can-
not be scanned from the ADF.
[Place Original on Glass]
[Unable to scan from ADF with
this zoom ratio.] The selected zoom ratio (200%
or more) cannot be used to scan
from the ADF. Place the document on the origi-
nal glass.
[Place Original on ADF]
[Place originals on the
Document Feeder.] The document is not loaded into
the ADF when scanning a docu-
ment containing pages of differ-
ent sizes. Load the document into ADF.
[Out of the Range of Auto Zoom]
[Zoom ratio for paper size is out-
lying. Select other paper or
zoom ratio.] An appropriate zoom ratio can-
not be selected with the Auto
Zoom setting selected. Specify a zoom ratio between
25% and 400%.
[Duplex Copy Disabled]
[Duplex copy disabled.
Cancel or select:
xxx] The selected paper type and size
cannot be used with duplex
(double-sided) printing. Cancel duplex (double-sided)
printing, or change the paper
type and size settings.
[Output Tray Full]
[Output tray full. Remove paper
from the tray.] Copy cannot be performed be-
cause the paper loading capacity
of the output tray of the dis-
played Finisher FS-529 has
reached the maximum. Remove all paper from the indi-
cated tray.
[Processing Tray Paper Left]
[Remove paper from finisher
tray] While paper is present on the
processing tray of Finisher FS-
529, the power switch is turned
on. Remove paper from the finisher
tray.
[User Authentication
Set user information.] User authentication settings
have been configured. Copies
cannot be made unless a user
name and correct password are
entered. Enter the correct user name and
password. (p. 4-12)
[Account Track
Set account information.] Account track settings have
been configured. Copies cannot
be made unless an account
name and correct password are
entered. Enter the correct account name
and password. (p. 4-12)