Konica Minolta bizhub C200 - Manual (Page 100)

C200 3-5
Assistant tool for C200 3
2
Note
For details on logging on to Administrator mode, refer to "Logging on to Administrator mode" on
page 3-6 .
For details on the settings that can be specified in Administrator mode, refer to "Administrator mode"
on page 3-26 .
Fax/Scan One-Touch Key Registra-
tion One-touch dial registration information can be exported and imported.
TX Settings Settings for registering source information and for redialing can be spec-
ified.
RX Settings Output settings for memory reception can be specified.
Fax Settings Information such as the machine’s ID and telephone number can be
specified.
Document Management Settings for forwarding received documents to the administrator and oth-
er forwarding destinations can be specified.
Report Settings Settings for activity reports and transmission reports can be specified.
Network Common Setting Basic network settings for TCP/IP and LDAP can be specified.
POP3 POP3 server settings can be specified.
SMTP TX Settings Transmission settings for the SMTP server can be specified.
SMTP RX Settings SMTP reception settings can be specified.
Scan Setting Settings for sending scan data can be specified.
FTP Setting FTP server settings can be specified.
SMB Setting SMB settings can be specified.
SNMP Setting SNMP v1/v2c and SNMP v3 settings can be specified.
SSL Setting SSL certificates can be issued.
TCP Socket Setting Whether or not TCP socket is used can be specified.
IP Relay The relay settings necessary for performing IP relay operations can be
specified.
Auto Log-out The length of time until an automatic logoff is performed can be speci-
fied.
Tabs Parameter Description