Konica Minolta bizhub C200 - Manual (Page 113)

C200 3-18
Assistant tool for C200 3
* Does not appear on the European model.
!
Detail
In order to specify SMTP authentication settings, the software switch settings must be specified. For
details, refer to
"Specifying security settings for e-mail transmissions (mode 380)" on page 2-14 .
If SMTP authentication settings for SMTP reception have been specified on a machine being registered
as the recipient of a one-touch dial button, the SMTP authentication user name and password must be
specified when the recipient is registered with the one-touch dial button.
Specifying TX: InternetFax (IP-Relay) settings
Destination Address Select the method (IP address/host name) for specifying the destination address, and then
type in the address of the destination.
A host name can be specified for the destination address if "DNS Settings" has been set to
"ON".
IP address format: ***.***.***.***; Range for ***: 0 to 255
Host name range: Up to 64 characters
Characters that can be entered: Alphanumeric characters and symbols (! # $ % & ' * + - . / = ?
_ ' { | } ~ @)
Port Number Type in the port number. (Range: 1 to 65535)
SMTP Authentica-
tion User Name Specify the SMTP authentication user name used when SMTP authentication is performed
with SMTP transmissions/receptions.
Range: Up to 64 characters
Characters that can be entered: Alphanumeric characters and symbols (space ! " # $ % & ' ~
= ¥ | ; : + * ` / ? @ _ - . , ( ) [ ] { } < >)
SMTP Authentica-
tion Password Specify the SMTP authentication password used when SMTP authentication is performed with
SMTP transmissions/receptions.
Range: Up to 32 characters
Characters that can be entered: Alphanumeric characters and symbols (space ! " # $ % & ' ~
= ¥ | ; : + * ` / ? @ _ - . , ( ) [ ] { } < >)
Retype SMTP Au-
thentication Pass-
word For confirmation, type in the SMTP authentication password again.
Range: Up to 32 characters
Characters that can be entered: Alphanumeric characters and symbols (space ! " # $ % & ' ~
= ¥ | ; : + * ` / ? @ _ - . , ( ) [ ] { } < >)
Sub Address Regis-
tration* A secondary recipient can be registered in case the data could not be sent to the main one-
touch dial destination.
Click the [Sub Address Registration] button to display a page where the secondary destination
can be selected. Select the check box for the one-touch dial destination to be specified as the
secondary destination, and then click the [Apply] button.
Item Description
Item Description
One-Touch No. Shows the number of the one-touch dial button to be programmed.
One-Touch Name Type in the recipient name that will appear on the one-touch dial button.
Range: Up to 24 characters
Characters that can be entered: Alphanumeric characters and symbols (! # $ % & ' ~ = + ` @ _
- { })
Destination Number Type in the fax number of the final recipient in the IP relay operation.
Range: Up to 64 digits
Characters that can be entered: 0 to 9 as well as *, #, P and T
IP Relay Destination Select the relay station for the IP relay operation.