Konica Minolta bizhub C200 - Manual (Page 159)

C200 3-64
Assistant tool for C200 3
2
Reminder
In order to apply changes to the settings for parameters marked with , the machine must be restarted
(turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the sub power switch before
turning off the main power switch. In addition, wait at least 10 seconds to turn the machine on after
turning it off; otherwise, the machine may not operate correctly.
IP Relay - IP Relay Settings
Specify the relay settings necessary for performing IP relay operations.
IP Relay - IP Relay Destination Registration
Relay stations in an IP relay operation can be registered.
Item Description
IP Relay Destination Specify the device that will relay transmissions.
Click the [Select] button to display a page where IP relay stations can be selected. Select the
address for the relay station, and then click the [Apply] button.
Relay Result Port Type in the number of the port receiving relay results. (Range: 1 to 65535)
Item Description
Check box To delete a registered IP relay station, select the check box for the IP relay station to be delet-
ed, and then click the [Delete] button.
IP Relay Address Shows the addresses of registered IP relay stations. Click a box containing "---", indicating
that the IP relay station has not yet been registered, to display a page for registering the IP relay
station.
Domain Name Shows the registered domain name. Click a box containing "---", indicating that the domain
name has not yet been registered, to display a page for registering the domain name.