Specifying the settings, Specifying the settings -7 – Konica Minolta bizhub C200 User Manual
Page 18
C200
1-7
Specifying network settings
1
2
Note
After changing the settings for these parameters, the machine must be turned off, then on again.
Specifying the settings
1
In the Network Settings screen, touch [Basic Settings].
2
Touch [DHCP].
3
Select the method for retrieving the IP address, and then touch [OK].
–
If the DHCP server is to be used, touch [Auto Input], and then continue with step 10.
–
If a fixed IP address is to be used, touch [IP Input], and then continue with step 4.
4
Touch [IP Address].
5
Use the keypad to type in the IP address, and then touch [OK].
–
The IP address cannot be specified to begin with "0.", "127.", or a number greater than "224".
–
To enter a number with less than 3 digits, touch [
→] to move the cursor to the next number.
6
Touch [Subnet Mask].