Konica Minolta bizhub C200 - Manual (Page 121)

C200 3-26
Assistant tool for C200 3
3.4 Administrator mode
The procedure for using the menu that appears on the left side of the main Administrator mode page is
described below.
3.4.1 System tab
From the System tab, settings concerning the system configuration of this machine can be specified.
System Settings - Measurement Unit Setting
Specify the basic unit of measure used with this machine.
System Settings - Paper Tray Setting
Specify the settings concerning the paper trays.
2
Note
"Tray 2", "Tray 3", "Tray 4", "LCT" and "Bypass Tray" are available only if the corresponding option has
been installed.
Item Description
Measurement Unit
Setting Select from "mm (Numerical Value)", "Inch (Num. Value)" and "Inch (Franction)"
Item Description
Priority Tray Select the paper tray to be given priority ("Tray 1", "Tray 2", "Tray 3", "Tray 4", "LCT" and "By-
pass Tray").
Auto Tray Switch
ON/OFF Select whether ("Allow") or not ("Restrict") the machine automatically switches between the
paper trays.