Konica Minolta bizhub C200 - Manual (Page 53)

C200 2-4
Specifying machine functions (software switch settings) 2
2.2 Specifying software switch settings
Follow the procedure described below to specify the software switch settings.
1
In the Administrator Management screen, touch [ ↓] to display the next page.
– For details on displaying the Administrator Management screen, refer to "Displaying the Network
Settings screen" on page 1-2 .
2
In the Administrator Management screen, touch [Software Switch Setting].
3
Touch [Mode Selection], and then use the keypad to type in the mode number.
4
Touch either [Bit Selection] or [HEX Selection], and then specify the setting.
– To specify the bits, touch [Bit Selection], touch [ ←] or [→] to move the cursor to the bit to be
changed, use the keypad to specify the bit, and then touch [Apply].