Konica Minolta bizhub C200 - Manual (Page 68)

C200 2-19
Specifying machine functions (software switch settings) 2
2.4.17 Specifying settings concerning the SNMP protocol (mode 390)
Specify the security level for the SNMP protocol.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2.4.18 Specifying settings concerning Assistant tool for C200 (mode 470)
Specify the file format for exporting registered one-touch information and the automatic logoff time for
Assistant tool for C200.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Settings 1010 0100 (HEX: A4)
Bits Description Settings Details
7-6 Specify the security level for read user authentication. 00 No authentication
01 auth-password
10 auth-password/priv-pass-
word
11 * Do not specify these set-
tings.
5-4 Specify the security level for write user authentication. 00 No authentication
01 auth-password
10 auth-password/priv-pass-
word
11 * Do not specify these set-
tings.
3-0 - 0000 * Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0100 (HEX: 00)
Bits Description Settings Details
7 File format for exporting 0 TXT format
1 CSV format
6-4 - 000 * Do not change the settings
for these bits.
3-1 Specify the automatic logoff time for Assistant tool for C200. 000 5 minutes
001 10 minutes
010 20 minutes
011 40 minutes
100 60 minutes
Others * Do not specify any settings
other than those mentioned
above.
0 - 0 * Do not change the setting
for this bit.