Konica Minolta bizhub C200 - Manual (Page 95)

C200 2-46
Specifying machine functions (software switch settings) 2
2.7.5 Specifying settings for Enlarge Display mode (mode 501)
Specify how screens are displayed in Enlarge Display mode while touch panel operations are performed.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2.7.6 Specifying the setting concerning public accounts (mode 835)
Specify whether or not to permit public accounts in Administrator mode.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Settings 0000 0000 (HEX: 00)
Bits Description Settings Details
7 − 0 *Do not change the setting
for this bit.
6 Specify whether to enlarge the upper-left corner of the
screen or wait for instructions on the area to display enlarged
when the [Enlarge Display] key is pressed. 0 Waits for instructions to en-
large the screen
1 Displays the upper-left cor-
ner of the screen
5-0 − 000000 *Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0000 (HEX: 00)
Bits Description Settings Details
7 Specify whether or not to permit public accounts in Admin-
istrator mode. 0 Not permitted
1 Permitted (Jobs with no ac-
count specified are counted
with the "Public" counter.)
6-0 − 0000000 *Do not change the settings
for these bits.