Konica Minolta bizhub C200 - Manual (Page 98)

C200 3-3
Assistant tool for C200 3
3.1.3 Accessing Assistant tool for C200
Assistant tool for C200 can be used from a Web browser.
1
Start the Web browser.
2
In the Address bar, type the IP address of this machine, and then press the [Enter] key. (Example)
http://192.168.1.20/
The main page for Assistant tool for C200 appears.
2
Note
In order to use Assistant tool for C200, this machine must be connected to a network. For details on
specifying the network settings, refer to
"Specifying network settings" on page 1-2 .
When SSL is enabled, type "https://<IP_address_for_machine>/" in the Address bar. For details on
SSL, refer to
"SSL Setting" on page 3-61 .
3.1.4 Description of pages
The pages of Assistant tool for C200 are constructed as shown below.
1 2
3
4
5
No Item Description
1 Konica Minolta logo Click the logo to go to the Konica Minolta Web site.
2 [Logout] button This button appears after you have logged on when account track settings have
been specified. Click this button to log off.
3 Administrator mode log-
on box This can be used to log on to Administrator mode.
4 Menu A menu for specifying settings appears.
5 Information and settings Details of the item selected from the menu are displayed.