Konica Minolta Fujitsu Scanner - Manual (Page 140)

120
5.2 How to check and reset the Consumables Counter
■ Consumables replacement message
The following message may appear while using the scanner:
Replace consumables when this message is displayed.
After clicking the [Ignore] button, this message will disappear and scanning will continue.
Replace the consumable as soon as possible.
As a default, this message appears again after 1,000 scans. If you do not wish this message to
display, click the [this message not display again].
To stop scanning and replace the consumable, click the [Cancel] button.
For the replacement of consumables, refer to the following sections.
Pad: “5.3 Replacing the Pad” on page 121
Pick rollers: “5.4 Replacing the Pick Roller” on page 122
Separator rollers: “5.5 Replacing the Separator Rollers” on page 124
Brake roller: “5.6 Replacing the Brake roller” on page 127