Konica Minolta Fujitsu Scanner - Manual (Page 163)

143
6.3 Troubleshooting
6
SOL
V
ING COMMON PR
OBLEMS (*1) Refer to “7.2 Document Quality” on page 153.
(*2) Refer to “7.5 Multifeed Detection Conditions” on page 158 .
(*3) Refer to “2.6 Loading Documents on the Hopper” on page 17.
(*4) Refer to "4 DAILY CARE" on page 99
(*5) Refer to “5 REPLACEMENT OF CONSUMABLES” on page 115.
(*6) Refer to “2.9 Setting the Paper Thickness” on page 29.
YES
NO
Is the Pad or the Brake roller worn
out?
continued from the previous page
Replace the worn out Pad or
Brake roller. (*5)
NO
YES
Have you set the document thickness
on
on the operator panel?
Set the document thickness
to a thicker value (*6)
If the problem canot be resolved with this flowchart, refer to "6.4
Before contacting a service partner."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.