Konica Minolta Fujitsu Scanner - Manual (Page 189)

169
8.1 Scanner Settings
8
SCANNER SETTINGS
［Device settings 2］
Selecting each item displays detailed settings (parameters) in the lower part.
Item Explanation Selectable parameter Default
Multifeed Select the method to detect
Multifeed. (Check either of over-
lapping or document length, or both
of document length and overlap-
ping)
Refer to
“8.4 Multifeed Detec-
tion ” on page 175
Deactivated/Checking for overlap-
ping/Checking difference of length/
Checking overlapping and difference
in length.
Selectable length (to be detected as
length difference): 10, 15 or 20mm Deactivated
Page edge filler
(ADF) Fill the end sections of a specified-
mm-wide with white or black on
the scanned image.
When the backing (background)
color is white, the end sections are
filed with white; and when the
background color is black, filled
with black. Top/left/right: 0-15mm
Bottom: -7 to 7mm (can be set in
increments of 1mm)
(A: Image area B: Filled area
A+B: Area to be output)
Top/Bottom/
Left/Right:
0mm
Dropout Color Drop out a preselected color for the
scanned image. (Binary black &
white/grayscale mode only) Red/Green/Blue/None Green
A
B