Konica Minolta Fujitsu Scanner - Manual (Page 194)

174
8.3 Offset/Scan scale
3. Adjust the Offset/Scan scale as necessary.
Offset setting
Target: Select ADF front or ADF back as target.
Horizontal: Adjusts the horizontal Offset.
Setting range -2mm to +3mm, in steps of 0.5mm.
Vertical: Adjusts the vertical Offset.
Setting range -2mm to +3mm, in steps of 0.5mm.
Scan scale setting
Target: Select ADF front or ADF back as target.
Vertical: Adjusts the vertical (document length) Scan scale.
Setting range -6.3% to +6.3%, in steps of 0.1%.