3 offset/scan scale, 3 offset/scan scale” on – Konica Minolta Fujitsu Scanner User Manual
Page 193
Advertising
173
8.3 Offset/Scan scale
8
SCANNER SETTINGS
8.3 Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 166
.
2.
Click the [Offset] button on the [Device setting] tab.
ATTENTION
The factory default setting are appropriate, so normally there is no need to
make any adjustment.
Advertising