5 setting the hopper height – Konica Minolta Fujitsu Scanner User Manual
Page 36
Advertising
16
2.5 Setting the Hopper Height
The adjustment is done by using the Operator Panel on the scanner.
When you press the
button, the hopper is raised one step higher.(Low Middle
High)
When pressing the button, the hopper is lowered one step lower.(High Middle Low)
HINT
Immediately after the scanner is turned on, the Hopper is initially set to Low.
Send t
o
Scan
Power T
hickness
Hopper He
ight
Function
Thick
Thin
Function
Hopper Height
Paper Thickness
Thin
Send to
Scan
Thick
Advertising