Temporary errors, Sol v ing common pr oblems – Konica Minolta Fujitsu Scanner User Manual
Page 153
133
6.2 Error messages of the Operator panel
6
SOL
V
ING COMMON PR
OBLEMS
■ Temporary Errors
[U] and a number will be displayed alternately.
* When pushing the [Scan] or [Send to] button, the error indication on the function number display will
disappear and the scanner goes into the ready status.
Display
Meaning
Solution
U1
A paper jam occurred.
1. Remove the jammed document. Refer to
Clearing Document Jams” on page 130
2. Confirm if the document conditions are appropri-
ate for scanning with the ADF. (Refer to
)
U2
A Multifeed occurred.
When pushing the [Send to] on the Operator panel,
the multi fed papers will be ejected.
U4
The ADF or the Pre-Imprinter cover is opened.
Close the ADF cover or Pre-Imprinter cover cor-
rectly.
U6
The print cartridge of the imprinter (sold sepa-
rately) is not set.
This error occurs only when the imprinter option
(sold separately) is used.
Refer to the
“fi-590PRF/fi-590PRB Imprinter
Operator Guide”
for further details.
U8
One of the following error occurred:
1. Document sensors are dirty.
2. The stacker is full.
3. The Brake roller or Separator rollers are not
installed properly.
1. Clean the document sensors.
For details, refer to
2. Verify that the number of sheets ejected to the
stacker is below stacker’s capacity, and that the
Pick roller is not set for manual feeding.
3. Verify that the both rollers are installed properly.
For details, refer to
.