Closing the hopper, Basic scanner opera t ions – Konica Minolta Fujitsu Scanner User Manual
Page 31
Advertising
11
2.2 Opening and Closing the Hopper
2
BASIC SCANNER OPERA
T
IONS
■ Closing the Hopper
1.
Remove the document if there is any on the Hopper.
2.
Slide the extension in the Hopper.
3.
Restore the original position of the hopper if the height of Hopper is
adjusted.
Lower the hopper to the bottom by pressing the button. (Refer to
4.
Close the Hopper.
ATTENTION
Push the hopper until it’s securely locked in place.
Hopper extension
Send t
o
Scan
Power T
hickness
Hopper H
eight
Function
Thick
Thin
Send to
Scan
Power T
hickness
Hopper H
eight
Function
Thick
Thin
Advertising