Fujitsu isis scanner driver – Konica Minolta Fujitsu Scanner User Manual
Page 68
48
2.13 How to use the Scanner Driver
■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series
by using application software that complies with the ISIS standard.
The following describes the procedure with examples of QuickScan
TM
for ordinary scanning by using this
driver software.
The procedure may vary depending on your application. If you use an application other than Quick-
Scan
TM
, refer to its Guide or Help for further information.
● Procedure for Basic Scanning Operation
1.
Start up the application.
From the [Start] menu, select [All Programs]-[QuickScan] and click [QuickScan].
2.
From the menu bar, select [Scan] - [Select Scanner].
⇒The following window appears.
3.
Select fi-5900C, then click the [OK] button.
4.
Select [Scan] - [New Batch...] on the menu bar.