Konica Minolta Fujitsu Scanner User Manual
Page 187
Advertising
167
8.1 Scanner Settings
8
SCANNER SETTINGS
Start up via Scanner
1.
Confirm if the scanner is connected correctly to the PC, then power on
the scanner.
2.
Press the [Function] button
on the Operator Panel. The Function
Number Display will show
.
When pressing the [Function] button, the Function Number Display will change in the
following way:
[1] [2] ... [9] [C].
3.
Press the [Send to]
button.
⇒ The [Software Operation Panel] window will be displayed.
Send to
Advertising