Konica Minolta Fujitsu Scanner - Manual (Page 193)

173
8.3 Offset/Scan scale
8
SCANNER SETTINGS
8.3 Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 166 .
2. Click the [Offset] button on the [Device setting] tab.
ATTENTION
The factory default setting are appropriate, so normally there is no need to
make any adjustment.