Konica Minolta PageScope Enterprise Suite - Manual (Page 162)

Account Manager 3
Account Manager 3-147
2
Reminder
If "31st" is specified for "Every Month", the process is performed at the
end of the month in months that do not have 31 days. (Example: April 30)
2
Reminder
To collect counters from the device, the information specified in the
Device List - Device Information Settings page must be same as the
settings for the device.
There may be a few minutes difference between the counter value
collected from the device and the latest counter value.
For details on the device information settings, refer to the Device
Manager User's Guide.
2
Note
In order to collect counters for users and account tracks registered in
Account Manager, the users and account tracks to be used with counter
collection must first be registered.
If the settings in the Device Information Settings page are not specified
correctly, the counters may only be collected by device.
When the firmware version of the device is not latest, some counters may
not be collected. For details, contact your service representative.
When user authentication is disabled for the device, counters will be
collected as a public user.
When multiple user names and account names are registered for the
device, counters are collected for one of them. To register a user and
account track, do not use any existing name.
Use a global address for IPv6 address. Counter information may not be
obtained if an address other than the global address is used.
2
Reminder
If a counter template is assigned by Device Manager, data is collected
based on the information specified for the counter template. For details
on the counter template, refer to the Device Manager User's Guide.
Counter Clear Click these buttons to clear the counters. The data is
cleared when the [All Clear], [Clear (A month)] or [Clear (3
months)] button is clicked. The counter for the last day is
not cleared.
Function Details