Konica Minolta PageScope Enterprise Suite - Manual (Page 112)

Account Manager 3
Account Manager 3-97
2
Reminder
The upper limit counters mentioned here are the counters that appear in
the Setting by User page. The data that is collected is different from the
counters used for accounting and analysis.
If a counter template is assigned by Device Manager, data is collected
based on the information specified for the counter template. For details
on the counter template, refer to the Device Manager User's Guide.
Operation when upper limit setting is enabled
If "Upper Limit Settings" is set to "Enable", the upper limit counters are
collected and an operation is performed, for example, printing is prohibited
or a warning is sent by e-mail when the upper limit specified in the Setting by
User page is nearly reached.
Operation when upper limit setting is disabled
If "Upper Limit Settings" is set to "Disable", printing is allowed after the upper
limit counter or totaled counter is collected.
When changed from "Disable" to "Enable"
When "Upper Limit Settings" is changed from "Disable" to "Enable" and the
[Apply] button is clicked, the message shown below appears.
To clear all counters in the Setting by User page, click the [OK] button. To
change the setting to "Enable" without clearing all counters in the Setting by
User page, click the [Cancel] button.
2
Reminder
It may take some time to clear all values.
When "Prohibit Printing" is specified for "Operation when value of Upper
Limit was reached", printing prohibition is not released immediately even
if the current value is cleared.