Barco R9002790 - Manual (Page 23)

4-4
Connections
R5976336 BARCOSLM R6 Executive 06092001
Input module insertion into the projector
To insert a module in one of the free slots, handle as follow :
1 Power down the projector and disconnect the power cord from the wall outlet.
2 Remove the dummy plate covering the chosen input slot by turning out both screws.
3 Slide the input module in the free slot. Insure the module is seated correctly in the guide grooves.
4 Press on both handles of the input module until the module plug seats in the connector of the projector.
5 Secure the input module by tightening both retaining screws.
6 Reconnect the power cord to the wall outlet and switch on the projector.
The new installed module can be selected with the digit buttons on the RCU or the local keypad.
PVU DIÃ
P
5 



C9ÃT9DÃ9DBDU6GÃHP9VG@
PVU DIÃ
2Q
     
T9DÃ9DBDU6GÃDIQVU
8PHHÃQPSU USDBB@SÃPVU ST!"!#!!ÃPVU ST!"!#!!ÃDI
DSSrprv‰r 9vht‚†‡vpÃ8‚qr B rrÃPƒr h‡v‚
SrqÃT‡hqi’
DS T’pÃPF
Ch qv rq
r€‚‡r
8USGÃ
Ch qv rq
r€‚‡r
8USGÃ!
U‚Ðh’
uh qv rq
r€‚‡r
8USGÃ"
9WDÃDIQVU
9WDÃDIQVU 9WDÃPVUQVU
CvtuÃ7hqvq‡uГГ$Г867G@ÃDIQVU
CvtuÃ7hqvq‡uГГ$Г867G@ÃDIQVU
S B 7 C8 W
S B 7 W C8