Barco R9002790 - Manual (Page 35)

5-6
Getting Started
R5976336 BARCOSLM R6 Executive 06092001
Using the RCU
Pointing to the reflective screen
Point the front of the RCU to the reflective screen surface.
Quick On Screen Color change
For quick change of the the on-screen color of the highlighted items.
The highlighted items on the menus can be displayed in red, green or yellow.
For a quick set-up, handle as follow :
1 Press ENTER to start up the adjustment mode.
2 Push the cursor key é or ê to highlight 'Installation'.
3 Press ENTER to display Installation menu.
4 Push the cursor key é or ê to highlight 'OSD Color'.
5 Press ENTER to display the OSD color menu.
6 Push the cursor key é or ê to highlight the desired color.
7 Press ENTER to select.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
INPUT SLOTS
800 PERIPHERALS
CONFIGURATION
OSD COLOR
NO SIGNAL
INTERNAL PATTERNS
LENS
QUICK ACCESS KEYS
MENU POSITION
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with é or ê
then <ENTER>
<EXIT> to return.
Select with é or ê
then <ENTER>
<EXIT> to return.
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2 menu 1 menu 3
8rvyvt
Tp rr
DSÆr†‚
S8V