Barco R9002790 - Manual (Page 65)

8-8
Installation Mode
R5976336 BARCOSLM R6 Executive 06092001
<ENTER> to toggle
<EXIT> to return.
menu 2
LENS OPTIONS
Use the same
zoom and focus
of the lens
for all files ?
[No]
Quick Access Keys
What can be done ?
It is possible to get an overview of the programmed functions of the different function keys (only accessible with an adapted RCU).
How to get an overview ?
1 Push the cursor key é or ê to highlight 'Quick Access Keys' (menu 1).
2 Press ENTER to select.
The Quick Access Overview menu will be displayed (menu 2).
No functions are preprogrammed.
menu 1
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Select with é or ê
then <ENTER>
<EXIT> to return.
QUICK ACCESS KEYS
<F1> :
<F2> :
<F3> :
<F4> :
<F5> :
<*> :
LENS ADJUSTMENTS
CLEAR ALL
menu 1
Select with é or ê
then <ENTER>
<EXIT> to return.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
LENS
Options
The zoom/focus and shift can be set the same for all files.
1 Push the cursor key é or ê to highlight 'Options' (menu 1).
2 Press ENTER to select.
The Lens Options menu will be displayed (menu 2).
3 Press ENTER to toggle between 'Yes' or 'No'.
[Yes] : all lens settings will be the same for all files.
[No] : different lens settings can be used for different files.
Default setting : [No]
Note: When in the 'No' possition, the lens memory is using incrimental motors which have an accurancy of 1 to 2 steps. This has no
implication for zoom, but focus might demand some finetuning when switchin from one source to another.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONVERGENCE
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]