Barco R9002790 - Manual (Page 69)

Service Mode
9-2 R5976336 BARCOSLM R6 Executive 06092001
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
BARCO LOGO
STATUS : [ON]
BACKGROUND : [ON]
SHIFT
HOT KEY : [TEXT]
Select with é or ê
<ENTER> to toggle/select
<EXIT> to return.
DIAGNOSIS
I2C
FORMATTER
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
Identification
How to display the Identification screen ?
1 Push the cursor key é or ê to highlight 'Identification' (menu 1).
2 Press ENTER to display the Identification screen (menu 2.
menu 1 menu 2
The information
The following information is available on the identification screen:
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
Detailed description
- type of projector : BARCO SLM R6
- software version
- Proj. Address : to change the address of the projector, see Change Projector Address in this chapter.
- Installation : possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration, follow the instructions in chapter 'Installation Guidelines'.
- Baud rate : transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be the
same as the baud rate of the connected computer. When there is a difference, consult 'Change Baudrate PC' in this chapter.
Select with é or ê
then <ENTER>
<EXIT> to return.
PRESET INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with <ENTER>
<EXIT> to return
Adjust
red with é or ê
blue with è or ç
Select with é or ê
then <ENTER>
<EXIT> to return.
BARCO
SLM R6
Proj. address : 001
Soft. version : 3.0
Config : front/
ceiling
Baudrate PC : 9600
text : ON
Serial no.: 1010200
Run time : 100 h