Toshiba Tecra S2 - Manual (Page 139)

TECRA A3/S2 8-5
Optional Devices
Removing a Memory card
To remove a memory card, follow the steps below.
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Stop a memory card device which you want to remove.
3. Grasp the card and remove it.
Removing a memory card
Memory card care
1. Do not write to a memory card if the battery power is low. Low power
could affect writing accuracy.
2. Do not remove a memory card while read/write is in progress.
Be sure the memory card is oriented properly before you insert it.
If Windows fails to read the memory card, remove it then reinsert it.
■ 5V SmartMedia card is not supported.
■ Memory Stick Duo/ Memory Stick Pro Duo/ Mini-SD card is not
supported.
■ Make sure the memory card indicator is out before you remove the card
or turn off the computer's power. If you remove the card or turn off the
power while the computer is accessing the card you may lose data or
damage the card.
■ Do not remove the card while the computer is in Standby or Hibernation
mode. The computer could become unstable or data in the memory card
could be lost.
■ Do not turn off or make computer in Standby or Hibernation mode during
data is being transferred. The computer could become unstable or data
in the memory card would be lost.
Set the write-protect switch to the lock position, if you do not want to record
data.