Toshiba Tecra S2 - Manual (Page 82)

TECRA A3/S2 4-3
Operating Basics
Two buttons below the TouchPad are used like the buttons on a mouse
pointer. Press the left button to select a menu item or to manipulate text or
graphics designated by the pointer. Press the right button to display a menu
or other function depending on the software you are using.
Using the AccuPointII Pointing device
To use the AccuPointII Pointing device, simply push it with your finger tip in
the direction you want to move the on-screen pointer.
Two buttons above the TouchPad work in the same way with the AccuPointII
pointing device as they do with the TouchPad.
AccuPointII Pointing device precautions
Certain conditions can affect the on-screen pointer when using AccuPointII
Pointing device. For example, the pointer may travel contrary to AccuPoint
operation or an error message may appear, if
■ You touch the AccuPoint during power-up.
■ You apply constant, soft pressure during power-up.
■ There is a sudden temperature change.
■ Strong stress is applied to the AccuPoint.
If an error message apears, reboot the computer. If an error message does
not appear, wait a moment for the pointer to stop, then continue operation.
You can also tap the TouchPad to perform functions similar to those of the
left button.
Click Tap
once
Double-click Tap twice
Drag and drop Tap to select the material you want to move. Leave your
finger on the TouchPad after the second tap and move the
material.