When writing or rewriting, When writing or rewriting -20 – Toshiba Tecra S2 User Manual
Page 99
TECRA A3/S2
4-20
Operating Basics
■
Be sure to close all other software programs except the writing software.
■
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■
Operate the computer in the full-power mode. Do not use power-saving
features.
■
Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that checks
files automatically in the background.
■
Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
■
Write from the computer's HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
■
Writing with software other than Sonic RecordNow! has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW or DVD+R/+RW disc.
■
Do not perform any of the following actions:
■
Change users in the Windows XP operating system.
■
Operate the computer for any other function, including use of a mouse
or TouchPad, closing/opening the LCD panel.
■
Start a communication application, such as a modem.
■
Apply impact or vibration to the PC.
■
Install, remove or connect external drives, including the following: PC
card, USB devices, external display, i.LINK devices, optical digital
devices.
■
Use the Audio/Video control button to reproduce music or voice.
■
Open the CD-RW, DVD-ROM, DVD-R/-RW,or DVD+-R/+-RW drive.
■
Remove the optical media drive from the Slim Select Bay (TECRA
S2 series only).
■
Make sure writing or rewriting is completed before going into standby/
hibernation. Writiing is completed if you can open the CD-RW,
DVD-ROM, DVD-R/-RW,or DVD+-R/+-RW drive tray.
■
Set the computer on a level surface and avoid places subject to vibration,
such as airplanes, trains, or cars. Do not use an unstable surface, such
as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.