Toshiba Tecra S2 - Manual (Page 141)

TECRA A3/S2 8-7
Optional Devices
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery (refer to
Chapter 6, Power System).
4. Remove the screw securing the memory module socket cover.
5. Slide your fingernail or a thin object under the cover and lift it off.
Removing the memory module socket cover
6. Fit the module's connectors into the computer's connectors at about a
45 degree angle
➀
and press the module carefully to ensure a firm
connection.
7. Push the module down
➁
so it lies flat. Latches on either side will click
into place to secure the module.
1
2
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.