Toshiba Tecra S2 - Manual (Page 71)

TECRA A3/S2 3-6
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to unlatch
the display panel.
Opening the display
2. Lift the panel up and adjust it to the best viewing angle for you.
Turning on the power
This section describes how to turn on the power.
1. Make sure the diskette drive is empty. If a diskette is in the drive, press
the eject button and remove the diskette.
2. Open the display panel.
3. Press the computer's power button and release.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first time
in this chapter.