Disconnecting, Disconnecting -7 – Toshiba Tecra S2 User Manual

Page 86

Advertising
background image

TECRA A3/S2

4-7

Operating Basics

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack

Connecting the internal modem

Disconnecting

To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer in the same manner.

In case of a lightning storm, unplug the modem cable from the telephone

jack.

Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Do not pull on the cable or move the computer while the cable is connected.

If you use a storage device such as a DVD-ROM drive or HDD connected

to a 16-bit PC card, modem speed might be slow or communication might

be interrupted.

If modem speed is low or communication is interrupted when you are using

modem, please check and set CPU speed to Maximum by TOSHIBA Power

Saver utility.

Advertising
This manual is related to the following products: