Bendix Commercial Vehicle Systems Bendix/King Global Positioning System KLN 35A - Manual (Page 88)

KLN 35A Pilot’s Guide Basic GPS Operation
3-53 Effective Date 5/95 006-08791-0000 Rev 0
Basic GPS Operation
Chapter 3
3.11.4. SUPPLEMENTAL WAYPOINT PAGES
The Supplemental waypoint pages (SUP 0, SUP 1, SUP 2, and
SUP 3) allow you to create “custom” waypoints for use in navigation.
A crop sprayer might want to create a waypoint on a field that is
sprayed regularly, for instance. Another candidate might be a small
airport which is not included in the KLN 35A data base. To learn how
to create a user-defined waypoint, see
section 4.4 .
3.11.4.1. The Supplemental 0 (SUP 0) Page
See figure 3-151.
NOTE: The SUP 0 page is only dis-
played for waypoint identifiers that do
not have a previously defined
position.
Line 1: The identifier for the as-yet-undefined waypoint.
Lines 2-4: Cursor fields for the three possible user-defined waypoint
creation methods. For information on creating user-defined way-
points, see
section 4.4 .
3.11.4.2. The Supplemental 1 (SUP 1) Page
See figure 3-152.
Line 1: The user-defined waypoint
identifier, preceded by an arrow if it is
the active waypoint. To the right of
the identifier are the letters “USR” to
signify that this is a user-defined
waypoint.
Lines 2-3: The latitude and longitude of the user-defined waypoint.
Line 4: The magnetic bearing to or the magnetic radial from the
user-defined waypoint and the distance in nautical miles. Placing the
cursor over the radial/bearing field and pressing
E toggles between
radial from and bearing to station.
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm MYWPT USR
ееееее N 40°05.48'
>Leg W102°57.95'
SUP 1 >134°To 2.3nm
Figure 3-152
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm MYWPT USR at:
ееееее User Pos L/L?
>Leg User Pos R/D?
SUP 0 Present Pos?
Figure 3-151