Barco R5976924 - Manual (Page 102)

7. Configurator, Projector alignment settings
Image 7-9
Side keystone
A Keystone adjustment with positive values
B Keystone adjustment with negative values
How to adjust
1. Click on the slider, hold down the mouse button and drag the slider to the left (bottom correction) or the
right (top correction) until the desired keystone correction is obtained
Or,
click in the input field next to the slider and enter the desired value with the keyboard.
Value can change between - 255 and + 255. A negative value is a correction at the bottom side of the
image. A positive value is a correction at the top side of the image. (image 7-10)
Image 7-10
Keystone correction
7.6 Blanking adjustment
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected
image on to the screen and to hide or black out unwanted information (or noise). A ’0’ on the bar scale
indicates no blanking.
Which blanking adjustments are available ?
• top blanking
• bottom blanking
• left blanking
• right blanking
98 R5976924 PROJECTOR TOOLSET 16/04/2009