Barco R5976924 - Manual (Page 51)

5. Configurator
5.4.1 Add projector
The possible projectors types depends on the installed plug-ins.
About adding a projector
To make it more easy to find back a projector while adding it to the software, the different projectors are
grouped in categories.
The following categories are available for the moment:
•
Digital cinema: this category contains all supported digital cinema projectors.
• Mid venue: this category contains all supported projectors from the CLM and SLM series.
• Large venue: this category contains all supported projectors from the FLM series.
• XLarge venue: this category contains all supported projectors from the XLM series.
How to add
1. Click Configuration on the menu and select Add (a). (image 5-3)
2. Move the cursor to the right and select the desired category.
3. Move the cursor again to right and select the desired projector.
The Create projector dialog box opens with the selected device type pictograph at the right side (b).
4. Enter the different device properties such as the projector identification, the connection parameters and
projector decorator for the configuration preview.
Image 5-3
Add projector
R5976924 PROJECTOR TOOLSET 16/04/2009 47