Diagnostics module, 1 introduction, 2 actual mode – Barco R5976924 User Manual
Page 221: 1 introduction 15.2 actual mode
15. Diagnostics module
15. DIAGNOSTICS MODULE
Overview
•
•
•
15.1 Introduction
Overview
Diagnostics gives the possibility to get an overview of the working of the projector.
Voltages, fan speeds and temperatures are red out as well as an indication about the lamp run time, lamp
strikes and projector run time.
Start up
To start up the Diagnostics, click on the diagnostics icon (
) on the navigation button bar or click on
Modules and select Diagnostics.
Image 15-1
Start Diagnostics module
Diagnostic modes
Two diagnostic modes are available:
•
Actual: current situation is represented in the interface.
•
History: a logging of previous warnings and errors.
To start up the desired mode, click on Diagnostics mode and select the desired mode, Actual or History.
Image 15-2
Diagnostics mode selection
15.2 Actual mode
Overview
•
Run time, lamp run time and strikes
•
•
•
R5976924 PROJECTOR TOOLSET 16/04/2009
217