Barco R5976924 - Manual (Page 142)

8. Configurator, Projector adjustment settings
8.7 Layout settings
Overview
• General introduction
• Load a layout
• Show window border
• Re-size a layout window
• Move a layout window
• Aspect ratio output window
• Lock a input window
• Set input window to full size
• Save a layout
• Layout Save as
• Rename a layout
• Delete a layout
• Edit window texture
8.7.1 General introduction
Overview
With the projector, it is possible to display two sources, one as main window and the other as PiP window.
The window size, timings and other settings can be set up for each source independently. The input
source for the main window and the PiP window can be the same source.
The result image is displayed on the projection screen.
Window
A window represents the active area of an input source.
Layout
A layout is a collection of windows. These windows are placed on a certain position within the
screen.
8.7.2 Load a layout
What can be done?
Layouts are stored it the projector’s memory and those can be loaded as the current active layout.
How to load
1. Click on the Open icon in the Layout Settings pane (a). (image 8-32)
The Load layout dialog box opens (b).
2. Select the desired layout from the list (c).
3. Click Open (d).
The selected layout is loaded.
138 R5976924 PROJECTOR TOOLSET 16/04/2009