Barco R5976924 - Manual (Page 160)

9. Configurator, Color alignment
Image 9-4
Adjustment via color gamut
Note that it is common practice to set the targets outside the projector color space. This
implies there would be clipping if a fully saturated input was applied. In normal scenes,
this does not happen, and the extra gain or saturation helps balance the overall lock.
If clipping occurs, there will typically be a hue shift when one of R, G, B goes into clip
ahead of the others.
9.4 White point adjustment
9.4.1 Start up
How to start up
1. Click on the open icon next to Active standard (a).
2. Select Custom (c).
156 R5976924 PROJECTOR TOOLSET 16/04/2009