Barco R5976924 - Manual (Page 167)

10. Configurator, Installation settings
10. CONFIGURATOR, INSTALLATION
SETTINGS
Overview
• Image orientation
• Lamp settings
10.1 Image orientation
The different configurations
Depending on the installation, the projector can be mounted in different ways. The 4 possible configura-
tions are:
•
Front / Table
• Front / Ceiling
• Rear / Table
• Rear / Ceiling
Font : projector is installed in table or ceiling mount configuration at the same side of the screen as the
audience.
Rear: projector is installed in table or ceiling mount configuration at the other side of the screen opposite
the audience.
How to change
1. Click on the drop down arrow of the combo box in the Image orientation pane. (image 10-1)
A list with the possible selection opens.
2. Select the correct orientation from the list.
The icon next to the combo box changes accordingly.
Image 10-1
Image orientation
10.2 Lamp settings
Current lamp settings
Lamp status
R5976924 PROJECTOR TOOLSET 16/04/2009 163