Barco R5976924 - Manual (Page 125)

8. Configurator, Projector adjustment settings
2. Click on Adjust. (image 8-13)
The Input dialog box is displayed. The current used input file is indicated next to Active input file.
3. Click in the text box of the spin box of the desired item and enter the desired value with the keyboard
Or,
click on the up down control until the desired value is reached.
Image 8-13
Adjust timings source file
Once a value or a setting is changed the file name next to Active input file gets an as-
terisk to indicate that the file is not saved yet.
When closing the Input dialog box, Projector Toolset asks to save the changes.
8.5.5 Save changes on an input file
What can be done?
Once a loaded file is changed, the settings can be save in the same file.
R5976924 PROJECTOR TOOLSET 16/04/2009 121