Barco R5976924 - Manual (Page 58)

5. Configurator
Image 5-9
Create a connection via device scan
Via a projector scan multiple connection (batch)
1. Select the Connection properties tab (a). (image 5-10)
The right pane changes to the connection setup page.
2. Click on the radio button next to A projector connected on the network to select the Ethernet connection
(b).
3. Click on the Device scan button (c).
The Scanning projector progress bar appears. The broadcast query (based on UDP) for projectors
scans the complete LAN network to detect available projectors on the network. The scanning results
are displayed in the Discover projectors dialog box (d). Only the projector of the added projector type
and the not yet added projectors to the configuration are in the list.
4. Hold down the Ctrl key and click on the projectors which must be added in batch (e). Click Open to
add the projectors (f).
A connection is made with all selected projectors.
54 R5976924 PROJECTOR TOOLSET 16/04/2009