Philips Robot de cuisine - Manual (Page 10)

ENGLISH 10
C
7 Press the pusher lightly onto the
ingredients in the feed tube.
◗ If you are shredding soft vegetables or fruits,
you can decrease the speed to position 1, to
prevent the shredded vegetables and fruits
from turning into puree.
C
8 To remove the insert from the insert
holder, take the insert holder in your
hands with its back pointing towards you.
Push the edges of the insert with your
thumbs to make the insert fall out of the
holder.
Kneading hook
The kneading hook can be used for kneading
bread dough and for mixing batters and cake
mixtures.
C
1 Put the bowl on the motor unit and place
the kneading accessory onto the driving
shaft.
2 Put the ingredients in the bowl and fasten
the lid onto the bowl. Place the pusher in
the feed tube to prevent ingredients from
splattering during the kneading process.
C
3 Select the maximum speed (position 2) on
the speed control.
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit
juices, soups, mixed drinks, sweat teas, shakes.
- Mixing soft ingredients, e.g. pancake batter or
mayonnaise.
- Pureeing cooked ingredients, e.g. for making
baby food.
◗ The appliance can be used with or without
the blender attached to the motor unit. If you
use the appliance without the blender, the
appliance will not function if the screw cap
has not been screwed properly onto the
motor unit.
C
1 To attach the blender jar, remove the
screw cap which is positioned above the
speed control.
C
2 Mount the blender jar on top of the
motor unit by turning it in the direction of
the arrow until it is firmly fixed.The handle
must be facing to the left!
Do not exert too much pressure on the handle
of the blender jar.
3 Put the ingredients in the blender jar.
C
4 Close the lid.
1
2
1
2