Philips Robot de cuisine - Manual (Page 11)

ENGLISH 11
C
5 Always connect the safety cover onto the
blender lid before you start processing.
C
6 Select the maximum speed (position 2).
The appliance will continue to run at this
speed until switched to position 0 (off).
See the table for the appropriate processing
times.
Tips
C
◗ Pour the liquid ingredients into the blender
jar through the hole in the lid.
◗ The longer you let the appliance run, the finer
the blending result will be.
◗ Pre-cut solid ingredients into smaller pieces
before putting them in the blender. If you
want to prepare a large quantity, process small
batches of ingredients instead of trying to
process a large quantity at once.
◗ Hard ingredients e.g. soy beans for soy bean
milk, must be soaked in water before they are
processed.
◗ Crush ice cubes by placing the ice cubes in
the jar, close the lid and use the pulse
function.
If ingredients stick to the wall of the blender jar:
1 Switch the appliance off and unplug it.
2 Open the lid.
Never open the lid while the appliance is still
running.
3 Use a spatula to remove the ingredients
from the wall of the jar.
Keep the spatula at a safe distance from the
blades (approx. 2 cm).
◗ If you are not satisfied with the results, let the
appliance run briefly a number of times by
turning the knob a number of times to the
pulse position (pulse).You can also try to get
a better result by stirring the ingredients with
a spatula (not while the blender is running), or
by pouring some of the contents out in order
to process a smaller amount.
◗ In some cases the ingredients are easier to
blend if you add some liquid e.g. lemon juice
when blending fruits.