Philips AVENT Digital Video Baby Monitor SCD603-10 2.4" color screen - Manual (Page 12)

12
B Warning:
Make sure the baby unit and parent unit are
dry before you connect them again.
3
Clean the adapters with a dry cloth.
7 Storage
When you are not going to use the baby monitor
for some time, remove the non-rechargeable
batteries from the baby unit and the rechargeable
battery from the parent unit. Store the parent unit,
the baby unit and the adapters in a cool and dry
place.
8 Ordering accessories
To purchase accessories for this appliance, please
visit our online shop at www.shop.philips.com/
service. If the online shop is not available in your
country, go to your Philips dealer or a Philips
service centre. If you have any difficulties obtaining
accessories for your appliance, please contact the
Philips Consumer Care Centre in your country.
You find its contact details in the worldwide
guarantee leaflet.
9 Assistance
For assistance call 1-800-54-AVENT
(1-800-542-8368) or visit our website:
www.philips.com/AVENT.
5.11 Reset feature
This feature allows you to reset the settings of
parent unit. You can use this function if problems
occur that you cannot solve by following the
suggestions in chapter ‘Frequently asked questions’.
1
Press and hold the on/off button on the
parent unit to turn it off.
2
Press and hold the volume down button
and simultaneously press and hold the on/off
button until a beep is heard. The parent unit
turns on again.
• The parent unit has now been reset to
default factory settings.
5.11.1 Default settings
• Loudspeaker volume: 3
• Voice activation: off
• Display brightness: 4
6 Cleaning and
maintenance
B Warning:
Do not immerse the parent unit and the baby
unit in water and do not clean them under
running water.
B Warning:
Do not use a cleaning spray or liquid cleaners.
1
Turn off the baby unit and the parent unit
and remove the adapters from the electrical
outlet.
2
Clean the parent unit and the baby unit with a
dry cloth.
D Note:
Fingerprints or dirt on the lens of the baby
unit may affect the camera’s performance.
Avoid touching the lens with your fingers.