Philips AVENT Digital Video Baby Monitor SCD603-10 2.4" color screen - Manual (Page 9)

9
5.3 Sound level lights
The parent unit continuously monitors the sound
level in your baby’s room and the sound level
lights let you know if there is any activity. If your
baby cries, the blue sound level lights light up on
the parent unit.
• As long as no sound is detected, the sound
level lights are out.
• When the baby unit picks up a sound, one or
more sound level lights on the parent unit go
on. The number of lights that go on depends
on the loudness of the sound picked up by
the baby unit. The sound level lights also
go on when the parent unit is set to a low
volume or when the voice activation mode is
activated (see section ‘Voice activation’ below).
5.4 Voice activation
The parent unit continuously monitors the
sound level in your baby´s room. When the voice
activation mode is activated, the video display only
turns on when the baby unit picks up a sound. As
long as no sound is detected, the video display is
off to save power.
1
To activate the voice activation mode, press
the voice activation button on the parent unit.
• The volume bar appears on the display to
show the selected volume.
D Note:
If the volume is set to a high level, the parent unit
consumes more power.
5.2 Adjusting display brightness
You can adjust the display brightness of the parent
unit to the level you prefer.
1
Press the brightness adjustment buttons on
the parent unit to adjust the brightness of the
video display.
• The display brightness bar appears on
the display to show the selected display
brightness.
D Note:
If the brightness is set to a high level, the parent
unit consumes more power.
ENGLISH