Philips AVENT Digital Video Baby Monitor SCD603-10 2.4" color screen - Manual (Page 7)

7
4.1 Positioning the baby
monitor
B Warning:
Keep the baby unit out of the reach of the baby.
Never place the baby unit inside or mount it on
the baby’s bed or playpen.
D Note:
If you use a cordless phone, wireless video, Wi-Fi
network, microwave oven or Bluetooth on 2.4Ghz
and you experience interference on either the
parent unit or baby unit, move the parent unit
further away until there is no more interference.
1
For optimal sound detection, place the baby
unit at least 1 meter (3.5 feet) away from your
baby, but no further than 1.5 meters
(5 feet) away.
2
There are two ways to position the baby unit:
1 Place the baby unit on a stable, level and
horizontal surface.
2 Mount the baby unit to the wall as shown
in the figure with the screws supplied.
3
Press and hold the on/off button on the
parent unit.
• The video display goes on and the linking
image appears on the display.
• When a connection has been established,
the baby is shown on the video display and
the signal strength symbol appears.
E Tip:
Find out what the best position is for
the parent unit by looking at the signal
strength symbol. The number of stripes
indicates the quality of the connection.
• If no connection can be established, the
parent unit beeps and the out-of-range
image appears on the display.
ENGLISH