ARB 3450130 - Manual (Page 10)

Last Rev Date: 19/04/06 Page 10 of 22 Fitting instructions# 3783216
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
27. Using holes in chassis mount
assembly as a template, drill
through crossmember on both
sides using 10mm drill bit.
28. Also drill through top of mount
into vehicle crossmember,
making sure that you are drilling
perpendicular.
29. Fit packer in between mount
assembly and vehicle
crossmember and align with the
two holes.
Viewed from above on LHS of vehicle
Warning: Drilling operations can result in flying
metal debris, safety glasses should be worn.
Warning: Drilling operations can result in flying
metal debris, safety glasses should be worn.