ARB 3450130 - Manual (Page 19)

Last Rev Date: 19/04/06 Page 19 of 22 Fitting instructions# 3783216
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
67. Undo the three 6mm bolts as
per photo so air deflector pan can
fit in between.
67. Fit front of air deflector to
underside of bar using black
8mm hardware.
68. Fit rear of air deflector using
original 6mm bolts. (refer to
paragraph 67.
69. If no fog lights are not going to
be fitted, fit light surround to
bar as is. If fog lights are going
to be fitted, cut out rear of
surround using a key hole saw
and remove rough edges with a
file.