ARB 3450130 - Manual (Page 21)

Last Rev Date: 19/04/06 Page 21 of 22 Fitting instructions# 3783216
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
76. When light is fitted to bracket
refit adjuster screw then reset light
alignment.
IF YOUR VEHICLE IS NOT
FITTED WITH FOG LIGHTS,
YOU CAN PURCHASE A FOG
LIGHT KIT FROM JEEP.
Part no. 82209301.
77. Follow steps to fit light housing
to bar same as paragraph 71.
NB. Photo shows silicon applied
around fog light cutout.
78. Position for Hi lift jacking
point.
OPTIONAL COLOUR CODE HOUSING